Ravek 69-106 8" LED UTV Brake & Taillight Pair - Yamaha Wolverine RMAX / X2 / X4

Ravek 69-106 Pulsing 8" LED UTV Brake & Taillight Kit

Enhance your trail safety and visibility with the Ravek 69-106 UTV Brake Light and Taillight Kit, specifically engineered to fit the Yamaha Wolverine RMAX and X-series. These 8-inch LED bars are five times brighter than your factory OEM lights. At Moto-House MX, we prioritize rider safety; this UTV kit features a specialized pulsing brake function that alerts trailing drivers the moment you slow down, significantly reducing the risk of rear-end collisions in dusty or low-light conditions.

The Ravek 69-106 is built to survive the harshest off-road environments. Each light features a heavy-duty aluminum housing and an impact-resistant polycarbonate smoke lens that is both scratch-resistant and IP67-rated for total dust and waterproof protection. With its 100% plug-and-play installation, you can mount these UTV lights to your roll cage, roof, or bumper without any drilling or complicated wiring, making it an essential upgrade for any serious Yamaha Wolverine owner.

Top Features: Ravek 69-106 Pulsing UTV Taillight Kit

• High-Intensity Visibility: Delivers red LED output that is 5x brighter than stock UTV lights for maximum presence on the trail.
• Pulsing Brake Technology: Automatically pulses the red light when brakes are applied to grab the attention of riders behind you.
• Indestructible Build: Features scratch-resistant polycarbonate lenses and rugged aluminum housings designed for aggressive UTV riding.
• True Plug-and-Play: Includes a vehicle-specific harness for Yamaha Wolverine models, ensuring a clean install with no wire splicing.
• Versatile Mounting: 8-inch bars can be mounted to UTV roll bars, bumpers, or any flat body panel using the included hardware or adhesive.
• IP67 Waterproof: Completely sealed against the elements, from deep mud holes to high-pressure washing.

Expert Pro-Tip: When mounting the 69-106 to your UTV roll cage, position the lights as high as possible. Higher mounting points are easier for trailing drivers to see over dust clouds kicked up by your tires. Use the included adhesive backing to mock up your placement before final-securing them with the roll bar mounts to ensure your wiring path is clear and looks professional.

Fitment List

Year Range	Vehicle Brand	Vehicle Model
2021-2025	Yamaha	Wolverine RMAX2 1000 / RMAX4 1000 (All Trims)
2024-2025	Yamaha	Wolverine X2 1000 R-Spec / XT-R
2019-2025	Yamaha	Wolverine X2 850 (All Models)
2019-2024	Yamaha	Wolverine X4 850 (All Models)

Frequently Asked Questions

Q: Do I need to cut any wires for the pulsing brake feature to work?
A: No. The Ravek 69-106 is completely plug-and-play. The pulsing logic is built into the light's circuitry and connects directly to your UTV's factory accessory or brake light harness.

Q: Can these be used as turn signals?
A: These lights are primarily designed as running lights and brake lights. While they are listed as having turn signal capability, integration depends on your vehicle having a UTV turn signal sub-harness or kit installed.

Q: Will the smoke lens reduce the brightness?
A: While the lens is smoked for a sleek, blacked-out look, the high-output LEDs are specifically tuned to shine through the polycarbonate, maintaining a brightness level 5x higher than OEM factory UTV lights.

Recommended Pairings

• Ravek 69-104 UTV Trunk Light Kit: Pair your safety lighting with interior bed lighting for the ultimate Yamaha utility setup.
• Chupacabra Offroad UTV Side Mirrors: Enhance your 360-degree awareness alongside your new high-visibility rear lighting.

Don't just be seen—be noticed. Buy now at Moto-House MX!

Moto-House MX – Choice of Champions – is located in Clermont/Montverde, FL. The Best Motocross/UTV & ATV Shop in Central Florida. Stop by our local store in Montverde, FL or enjoy lightning-fast shipping across the USA.