ProX Racing Parts Connecting Rod Kit 03.2414 — Yamaha YZ250F / YZ250FX / WR250F 2014-2025

ProX Racing Parts Connecting Rod Kit 03.2414  — Yamaha YZ250F / YZ250FX / WR250F 2014-2025

Product Description

Rebuild your crankshaft configuration with ultimate confidence using the ProX Racing Parts Connecting Rod Kit. Over hours of high-RPM racing and aggressive off-road riding, your factory connecting rod bearings experience severe vertical loads and heat friction, leading to side-play wear or radial failure. This premium rod kit serves as a heavy-duty bottom end rebuild solution, manufactured in Japan to strict OEM standards to handle the brutal high-compression demands of modern fuel-injected Yamaha 250cc four-stroke platforms.

This master engine kit features a specialized barreled rod profile engineered from premium double-forged steel alloy to optimize strength-to-weight ratios and maximize fatigue life. The complete package comes fully stocked with a precision-ground crankpin, low-friction big-end roller bearing, durable silver-plated small-end bearing, and matched thrust washers. Built to mirror exact factory dimensional specs—featuring a 92.50mm center-to-center length and 38.00mm big end bore—this setup ensures drop-in compatibility and balanced rotating mass at maximum RPM.

Top Features: ProX Connecting Rod Kit
o Manufactured in Japan from double-forged steel alloys to deliver maximum tensile strength.
o Specialized barreled rod design limits structural flex and optimizes overall valvetrain balancing.
o Supplied complete with precision-ground crankpin, high-speed roller bearings, and thrust washers.
o Engineered to exact OEM specifications to guarantee a balanced, drop-in replacement fit.

Please review the detailed compatibility data below to ensure an exact fitment match for your motorcycle before finalizing your purchase.

Fitment List

Year Range	Vehicle Brand	Vehicle Model & Sub-Model
2014-2025	Yamaha	YZ250F
2021-2023, 2025	Yamaha	YZ250F Monster Energy Yamaha Racing Edition
2024	Yamaha	YZ250F Monster Energy
2015-2025	Yamaha	YZ250FX
2015-2025	Yamaha	WR250F

Frequently Asked Questions

Q: Does this connecting rod kit arrive fully assembled on a crankshaft web?
A: No, this is a component rebuild kit. It includes the naked double-forged rod, crankpin, bearings, and thrust washers. It requires specialized mechanical press tools and balancing fixtures to install onto your existing factory crankshaft webs.

Q: What are the exact structural measurements for this 0923-0365 rod kit?
A: This kit features a center-to-center length of 92.50 mm, a big end bore diameter of 38.00 mm, a big end width of 18.00 mm, and a pin end bore of 16.00 mm.

Q: Why is a forged barreled rod style preferred over basic cast variants?
A: Forged steel provides a tightly compressed grain layout that offers vastly superior resistance to stretching, twisting, and fracturing under the abrupt load spikes common to high-compression four-stroke dirt bikes.

Expert Pro-Tip: Pressing a new connecting rod kit is a high-precision job that requires a heavy hydraulic shop press and an ultra-accurate dial indicator alignment setup. When splitting and rebuilding the crank webs, the final crankshaft assembly must be trued to less than 0.015mm (less than a thousandth of an inch) of runout. If your crank is trued poorly, it will generate extreme harmonic vibrations that will tear up your new main bearings, cause oil pump failure, and ruin your engine cases within a few hours of track time.

Recommended Pairings:
o Yamaha YZ250F / YZ250FX Performance Parts & Upgrades
o Yamaha 4-Stroke Performance Parts
o Premium Case Splitters & Crankshaft Tools

At Moto-House MX, we carry the best brands in motocross and off-road performance. Our team has over 40 years of experience helping riders get more out of their bikes. Every order ships fast from our Central Florida location.

Moto-House MX – Choice of Champions – Clermont / Montverde, FL. Central Florida's premier powersports source with lightning-fast worldwide shipping.