Motion Pro Countershaft Seal Puller Tool 08-0636

Motion Pro Countershaft Seal Puller Tool 08-0636

Product Description

Removing a leaky drive sprocket seal without marring delicate aluminum engine surfaces can be a high-stakes challenge. The Motion Pro Countershaft Seal Puller Tool is the industry standard solution designed to address this exact maintenance headache. Engineered specifically to handle stuck, heat-cycled oil seals located behind your drive sprocket, this professional-grade shop tool eliminates the risky and messy practice of using drywall screws, picks, or pry bars near critical shaft splines and crankcases, serving as the ultimate dedicated counter shaft seal puller for precision mechanics.

Crafted from heavy-duty hardened steel with a sleek black finish, this tool relies on a unique expansion collet mechanism. When inserted into the seal center, it expands evenly to grab the internal steel casing of the seal from behind. By tightening the extraction bolt, the mechanism applies perfectly linear outward pressure, ensuring the seal is pulled completely straight out of its bore. This smart alignment prevents off-angle binding and ensures zero contact with the engine case wall or the countershaft itself.

Top Features: Motion Pro Countershaft Seal Puller

• The only dedicated expansion tool on the market built specifically for stubborn countershaft seals.
• Safely fits and extracts oil seals featuring an inner diameter ranging from 29 mm to 47 mm.
• Unique internal expansion collet architecture ensures perfectly linear removal to protect engine cases.
• Robust, heat-treated steel development stands up to heavy everyday service bay utilization.

Please measure your countershaft or replacement seal inner diameter dimensions below to verify compatibility before completing your purchase.

Application Info

Tool Type	Seal ID Range Compatibility	Supported Vehicle Engines
Specialty Crankcase Seal Remover	29 mm to 47 mm Inner Diameter (ID)	Off-Road Dirt Bikes, Motocross, Street Motorcycles, ATVs, and UTVs

Frequently Asked Questions

Q: Will this puller tool work on smaller shift shaft or kickstarter seals?
A: No, this specialty tool is optimized specifically for the larger diameter size bracket of countershaft drive seals (29 mm to 47 mm ID). For smaller applications like shifter shafts, a standard pick set or specialized small-diameter hooks are typically used.

Q: Do I need to split the engine crankcases to use this tool?
A: Absolutely not. The primary benefit of this Motion Pro design is that it enables external extraction, allowing you to pull the leaky seal from the outside of the cases without unbolting or dismantling the engine block.

Expert Pro-Tip: Before sliding the collet of your 08-0636 puller over the shaft, take a layer of electrical tape or painters tape and wrap it around the sharp, splined edges of the countershaft. Dirt bike countershaft splines can have micro-burrs from sprocket wear that can nick the tool's internal collet fingers or tear your new seal during the subsequent installation. Once the old seal is safely popped out, thoroughly clean the bore with contact cleaner and check for any leftover debris before pressing the new seal home.

Recommended Pairings:
o Motorcycle Tools Performance Parts
o Motorcycle Chemicals Performance Parts
o MX Chains Performance Parts

At Moto-House MX, we carry the best brands in motocross and off-road performance. Our team has over 40 years of experience helping riders get more out of their bikes. Every order ships fast from our Central Florida location.

Moto-House MX – Choice of Champions – Clermont / Montverde, FL. Central Florida's premier powersports source with lightning-fast worldwide shipping.