MOOSE OFFROAD A25-1402 Front Wheel Bearing and Seal Kit — KTM / Husqvarna / Gas Gas / Beta

MOOSE OFFROAD — Premium EMQ-Quality High-Speed Bearings, Type TC Double-Lip Nitrile Seals, and Premium Waterproof Grease Packing for KTM, Husqvarna, Gas Gas, and Beta Front Hubs

Restore ultra-smooth rolling performance and protect your front hub assembly with the MOOSE OFFROAD A25-1402 Front Wheel Bearing Kit. Operating right in the direct path of roost, deep mud, sand, and high-pressure wash-downs, front wheel bearings are highly susceptible to moisture contamination and friction wear. Once factory seals degrade, fine grit enters the bearing races, leading to steering wobble, drag, and dangerous high-speed front-end instability. This precision-engineered overhaul kit provides everything required to completely service one front wheel hub, replacing worn internal components with heavy-duty hardware that can handle the violent impacts of motocross landings and technical off-road terrain.

Every bearing included in this premium set is manufactured to stringent Electric Motor Quality (EMQ) standards, ensuring high-speed capability, incredibly low rotational drag, and tight mechanical tolerances. To maximize service life, the bearings come pre-packed with Chevron SR1-2 high-performance grease, enriched with advanced rust and oxidation inhibitors to shield internal steel balls from moisture exposure. The accompanying wheel seals are crafted from premium Type TC nitrile elastomer and feature specialized dual-lip boundaries. Bolstered by an integrated steel garter spring, these seals maintain continuous, uniform pressure on the axle shaft to lock clean lubrication inside the hub while creating an impenetrable barrier against water, mud, and sand silt.

• EMQ High-Speed Bearings: Premium Electric Motor Quality bearings offer low rolling resistance and superior load capacity.
• Type TC Nitrile Seals: Dual-lip elastomer seals keep trail contamination completely locked out of vulnerable wheel hubs.
• Steel Garter Springs: High-tensile interior wrapping ensures constant, firm radial pressure on the axle for extended seal efficiency.
• Chevron SR1-2 Greasing: Factory pre-packed with premium marine-grade grease featuring heavy-duty rust and water-washout inhibitors.
• Rubber-Coated O.D.: Seals utilize a specialized rubber outer diameter coating to achieve a perfect, leak-free seating fit inside the hub.
• Expansive European Fitment: Engineered to match standard MX1 hubs across an extensive list of KTM, Husqvarna, Gas Gas, and Beta models.

Moto-House MX Pro Tip:

Front wheel bearings are essential for precise cornering tracking and safety—if you feel a slight clicking in your handlebars or can manually wiggle your front tire side-to-side while the bike is on a stand, your bearings are severely compromised. Installation Tip: When removing old bearings, heat the aluminum hub gently with a heat gun to allow the metal to expand, making extraction much easier. When driving the new EMQ bearings home, use a proper bearing driver tool or a socket that matches the outer race of the bearing only. Pressing on the inner race or the delicate center dust seal will instantly dent the internal balls and ruin the bearing before you even hit the track. Finishing Touch: Apply a light film of waterproof grease to the outer lips of the TC seals and the axle slider shaft to ensure smooth assembly and maximum secondary water defense.

Kit Components	Technical Standards	Hub Configuration
Required Front Bearings & Seals (Per Wheel)	EMQ High-Speed / Low-Drag Specs	Standard MX1 Front Hubs
Type TC Double-Lip Rubber Seals	Chevron SR1-2 Rust Inhibiting Grease	KTM SX/XC/EXC & Husqvarna TC/TE/FC
Weight: 0.95 lbs	Nitrile Elastomer Rubber Outer O.D.	Gas Gas MC/EC/EX & Beta RR/Xtrainer

FAQ Questions

Q) Does this single kit include enough bearings to fix both the front and rear wheels?
A) No, this kit is designated specifically for the front wheel assembly only. Wheel bearing kits are packaged per individual wheel hub due to differing axle diameters between front and rear axles.

Q) Will this fit aftermarket wheel set brands like Tusk, Warp 9, or Dubya?
A) This kit is engineered to fit standard OEM hubs and any aftermarket hubs designed to accept original stock-sized bearings and seals. If your aftermarket wheels use custom proprietary bearings, check the manufacturer specification sheet.

Moto-House MX – Choice of Champions – is located in Clermont/Montverde, FL. We are the best shop in Central Florida with lightning-fast shipping.