MOOSE OFFROAD 0430-1309 Heavy Duty Front Outer Tie Rod End Kit — Polaris RZR Pro R / Turbo R UTV

MOOSE OFFROAD — Premium High-Tensile Forged Steel Construction, Heavy-Duty Outer Wear-Resistant Steering Joints, and Exact Factory Geometry Precision for Polaris RZR Pro R, Turbo R, Pro S, and 4-Seat Sport Utility UTV Steering Rack Shafts

Restore tight, predictable, and laser-accurate steering control to your high-performance wide-track side-by-side with the heavy-duty MOOSE OFFROAD 0430-1309 Front Outer Tie Rod End Kit. Hard off-road acceleration, fast cornering over rough terrain, and tackling challenging technical trail obstacles put tremendous mechanical stress on your steering linkage—especially on aggressive, high-horsepower machines like the Polaris RZR Pro R, Turbo R, and Pro S platforms. Over time, internal ball joints develop excessive play from water intrusion, fine sand, and grease breakdown, resulting in a loose steering wheel feel, unsafe front wheel wobble, and uneven tire wear. This premium-grade replacement kit replaces worn, sloppy outer components on either the driver or passenger side with a beefed-up structural design engineered to handle the brutal feedback of rocky trails and high-speed desert runs.

Every component in this robust steering kit is manufactured from high-tensile forged steel to ensure maximum resistance against bending, snapping, and structural deformation during hard off-road impacts. Designed as a direct drop-in factory replacement, this kit offers premium OEM-level performance and dimensional accuracy at a fraction of dealership costs. Built with specialized internal ball-and-socket configurations that manage intense axial and radial loads, these outer tie rod ends deliver ultra-smooth articulation without binding under full suspension travel. Packed with high-grade protective dust boots to seal out fine silt, sand, mud, and water, this steering overhaul kit ensures your Polaris stays tracking straight through the roughest terrain.

• Heavy-Duty Forged Steel: High-density structural composition provides immense yield strength to withstand severe trail impacts.
• Eliminates Steering Play: Replaces worn, loose ball joints to eliminate dangerous high-speed wheel wobble and steering wheel slop.
• OEM Dimensional Matching: Precision-cut internal threads allow a seamless fit directly onto your factory inner tie rod shafts.
• Protective Seal Booting: Heavy-duty rubber boots keep clean lubrication sealed inside while locking out water, mud, and dust.
• Cost-Effective Overhaul: Delivers professional-grade durability and identical mechanical tolerances at a budget-friendly price point.
• Universal Outer Fitment: Engineered to service standard outer steering rack positions on either the left-hand or right-hand side of your high-performance RZR chassis.

Moto-House MX Pro Tip:

Worn out tie rod ends are more than just a nuisance—they are a major safety hazard, especially on a high-powered machine like the RZR Pro R or Turbo R. If a worn joint shears completely off while you are traversing rugged terrain or pinning the throttle on a fast trail, you instantly lose all steering control over that front wheel, which can result in a severe crash or a costly trail retrieval. Installation Tip: When removing your old outer tie rod end, count the exact number of full rotations it takes to unscrew it from the rod, or measure the exact thread distance with a digital caliper. Thread the new Moose tie rod end on using those precise measurements to keep your front-end alignment close to factory specs. Post-Install Protocol: Always perform a proper front-wheel toe-in alignment check once everything is bolted up. Ordering Note: These kits are sold individually to repair one single outer tie rod assembly; if you want to completely overhaul both sides of your front-end, you will need to purchase two kits total.

Kit Components	Material Engineering	Chassis Category
Outer Tie Rod End Rebuild Kit (Per Rod)	High-Tensile Forged Structural Steel	UTV / High-Performance Side-by-Side (Polaris)
Fits Left or Right Front Outer Position	Heavy-Duty Inner Ball & Socket Layout	Polaris RZR Pro R & Pro R 4 Ultimate, Premium, Sport, Launch Edition (2022 - 2025)
Weight: 3.35 lbs	Abrasion-Resistant Protective Dust Boots	Polaris RZR Turbo R & Pro S Models (All 2-Seat & 4-Seat Configurations 2022 - 2025)

FAQ Questions

Q) Does this single box include components to fix both the left and right sides of my UTV?
A) No. This kit includes the necessary components to service one single outer tie rod assembly. Because the component design is universal for the left or right side, you will need to purchase two of these identical kits if you plan to overhaul both front steering links simultaneously.

Q) Will this tie rod end fit with my aftermarket upgraded heavy-duty tie rod shafts?
A) This kit is engineered to match standard factory OEM thread pitches and shaft dimensions. If your aftermarket upgraded tie rods utilize factory-sized replacement ends, this kit will fit perfectly; if they utilize larger oversized heavy-duty thread links, a proprietary end may be required.

Moto-House MX – Choice of Champions – is located in Clermont/Montverde, FL. We are the best shop in Central Florida with lightning-fast shipping.